SAL Face Stock Films 10

Treofan SAL face stock films are designed for a wide range of applications - including solid white, high yield white voided, as well as no-label look transparent products.

LUH White Voided SAL - Face Stock Film

  • Treated glossy surface
  • White OPP layer
  • Highly voided OPP core
  • OPP layer
  • Treated matt surface

Get Further Information

Applications

Specifically developed for self adhesive face stock and cut & stack wrap around labels.

Description

LUH is a white voided OPP film, matt on one side. Its special formulation results in a film with very high yield. The film is treated on both sides. LUH 40 has been designed for reel fed, all other thicknesses for cut & stack applications. LUH is wound print side outside.

Product Features

  • Suitable for sheet fed operations
  • Good machineability and antistatic properties
  • Very high yield due to very low density
  • Soft touch effect after moulding
  • Distortion free decoration
  • Offset sheet fed printing with UV curing and oxidative drying inks. For offset printing the film should be stored at 20-25°C, 60-70% rh for a min. of 48 hours
  • Gravure, UV-flexo printing
  • For reel to reel printing with UV inks, inline Corona treatment is strongly recommended
  • Screen printing and letterpress using UV inks
  • Density (g/cm³): 0.55
  • Nominal thickness (μm): 40 | 60 | 70 | 75
  • Unit weight (g/m²): 22.0 | 33.0 | 38.5 | 41.3
  • Average yield (m²/kg): 45.5 | 30.3 | 26.0 | 24.2

SHD White Voided SAL - Face Stock Film

  • Printable layer, treated
  • Transparent layer
  • Voided layer
  • Cold seal receptive layer

Get Further Information

Applications

For cold seal coating as a monoweb or in laminates.

Description

SHD is a 4 layer, white voided, one side treated OPP film with exceptional surface gloss for cold seal applications.

Product Features

  • Tailored for cold seal coating applications
  • High gloss face contributes to superb print presentation
  • Low water vapour permeability
  • Film with good bending stiffness
  • Density (g/cm³): 0.75
  • Nominal thickness (μm): 40 | 60
  • Unit weight (g/m²): 30.0 | 45.0
  • Average yield (m²/kg): 33.3 | 22.2

SHH White Voided SAL - Face Stock Film

  • Printable layer, treated
  • Transparent layer
  • Voided layer
  • Cold seal receptive layer, treated

Get Further Information

Applications

For cold seal coating and use in laminates.

Description

SHH is a 4 layer, white voided, both sides treated OPP film with exceptional surface gloss.

Product Features

  • Tailored for cold seal coating applications
  • High gloss face contributes to superb print presentation
  • Low water vapour permeability
  • Film with good bending stiffness
  • Density (g/cm³): 0.75
  • Nominal thickness (μm): 40
  • Unit weight (g/m²): 30.0
  • Average yield (m²/kg): 33.3

ELR White Voided SAL - Face Stock Film

  • Treated glossy surface
  • OPP layer
  • Voided OPP core
  • OPP layer
  • Treated matt surface

Get Further Information

Applications

Developed for self adhesive face stock labels.

Description

ELR is a white voided OPP film, specifically developed for label applications where the conversion of large sheets and finally large labels is required. ELR is treated on both sides, one side is matt, one side is glossy.

Product Features

  • Excellent antistatic properties
  • Superior machineability and die cutting
  • Good web flatness
  • Suitable for sheet fed operations
  • Improved yield due to low density
  • Glossy effect after injection moulding
  • Offset sheet fed printing with UV curing and oxidative drying inks. For offset printing the film should be stored at 20-25°C, 60-70% rh for a min. of 48 hours
  • Gravure and UV-flexo printing
  • For reel to reel printing with UV inks, inline Corona treatment is strongly recommended
  • Screen printing and letterpress using UV inks
  • Density (g/cm³): 0.88
  • Nominal thickness (μm): 70
  • Unit weight (g/m²): 59.8
  • Average yield (m²/kg): 16.7

LPT Thick Solid - Transparent SAL - Face Stock Film

  • Treated high gloss surface
  • Transparent OPP core
  • Treated high gloss surface

Get Further Information

Applications

Specifically developed for self adhesive face stock labels.

Description

LPT is a treated transparent OPP film, treated and glossy on both sides.

Product Features

  • Good antistatic properties, web flatness and machineability
  • Offset sheet fed printing with UV curing and oxidative drying inks. For offset printing the film should be stored at 20-25°C, 60-70% rh for a min. of 48 hours.
  • Gravure and UV-flexo printing
  • For reel to reel printing with UV inks, inline Corona treatment is strongly recommended
  • Screen printing and letterpress using UV inks
  • Density (g/cm³): 0.91
  • Nominal thickness (μm): 57
  • Unit weight (g/m²): 51.9
  • Average yield (m²/kg): 19.3

LPR Thick Solid - Transparent SAL - Face Stock Film

  • Treated glossy surface
  • OPP layer
  • Transparent OPP core
  • OPP layer
  • Treated matt surface

Get Further Information

Applications

Developed for self adhesive face stock labels.

Description

LPR is a matt, transparent OPP film. LPR is treated on both sides, one side matt and one side glossy.

Product Features

  • Good antistatic properties, web flatness and machineability
  • Offset sheet fed printing with UV curing and oxidative drying inks. For offset printing the film should be stored at 20-25°C, 60-70% rh for a min. of 48 hours
  • Gravure and UV-flexo printing
  • For reel to reel printing with UV inks, inline Corona treatment is strongly recommended
  • Screen printing and letterpress using UV inks
  • Density (g/cm³): 0.91
  • Nominal thickness (μm): 57
  • Unit weight (g/m²): 51.9
  • Average yield (m²/kg): 19.3

EWG Coated Transparent SAL - Face Stock / Lamination Film

  • Treated glossy surface
  • OPP layer
  • White OPP core
  • Untreated glossy surface

Get Further Information

Applications

Specifically developed for self adhesive face stock labels.

Description

Treofan EWG is a both sides glossy, solid white OPP film.

Product Features

  • Both sides glossy
  • High gloss
  • High whiteness
  • Excellent machinability
  • Density (g/cm³): 0.96
  • Nominal thickness (μm): 50
  • Unit weight (g/m²): 48.0
  • Average yield (m²/kg): 20.8

CLG Coated Transparent SAL - Face Stock / Lamination Film

  • Acrylic coated layer
  • Transparent OPP core layer
  • Acrylic coated layer

Get Further Information

Applications

Suitable for all types of packaging machines, for printing and high gloss lamination.

Description

CLG is a transparent OPP film, both sides acrylic coated to provide consistent high gloss performance.

Product Features

  • Low sealing threshold and excellent sealstrength
  • Outstanding hot tack
  • Exceptional optical properties
  • Water based coating
  • Good aroma barrier
  • Easy converting on both sides
  • Density (g/cm³): 0.89
  • Nominal thickness (μm): 20 | 25 | 30 | 35 | 40 | 50
  • Unit weight (g/m²): 17.7 | 22.3 | 26.8 | 31.4 | 35.9 | 45.0
  • Average yield (m²/kg): 56.5 | 45.0 | 37.3 | 31.9 | 27.9 | 22.2

CLB Coated Transparent SAL - Face Stock / Lamination Film

  • Acrylic coated layer
  • Transparent OPP core layer
  • PVDC coated layer

Get Further Information

Applications

Suitable for applications where an increased shelf life of packed products is required, together with an attractive presentation.

Description

CLB is a transparent OPP film, one side acrylic and one side PVDC coated.

Product Features

  • Excellent barrier to gas and aromas
  • Outstanding sealing properties with PVCD, wide sealing range with Acrylic
  • Consistent machineability on a wide range of packaging machines
  • Easy convertibility (printing and lamination)
  • Excellent optical properties
  • Water based coating
  • Density (g/cm³): 0.94
  • Nominal thickness (μm): 21 | 26 | 31 | 41
  • Unit weight (g/m²): 20.5 | 25.0 | 29.6 | 38.7
  • Average yield (m²/kg): 49.0 | 48.8 | 33.8 | 25.8

CGQ Coated - Gloss Voided SAL - Face Stock / Lamination Film

  • Acrylic layer
  • Transparent layer
  • Glossy layer
  • Voided core layer
  • Glossy layer
  • Transparent layer
  • Acrylic layer

Get Further Information

Applications

Suitable for HFFS, VFFS overwrapping and for cold seal applications.

 

 

Description

CGQ is a 5 layer, white opaque voided OPP film, coated on both sides with acrylic lacquer, which provides excellent performance on a wide range of packaging machines and a stable surface for printing.

 

 

 

 

Product Features

  • Excellent stiffness and opacity
  • High gloss surfaces
  • Excellent machineability and sealability
  • Good aroma and moisture barriers
  • Good light barrier
  • Easy printing and lamination on both sides
  • Water based coatings
  • Density (g/cm³): 0.70
  • Nominal thickness (μm): 35 | 40
  • Unit weight (g/m²): 24.6 | 28.1
  • Average yield (m²/kg): 40.7 | 35.6